EFFEGIBREGA MACROJET HTM

EFFEGIBREGA MACROJET HTM is a device specifically designed for the thorough washing of 3D-printed models with water-soluble support material. Optimal for washing holes, cavities and “difficult” areas of POLYJET technology printed parts. By adjusting the shape of the water jet and the pressure, the operator manages the washing action depending on the complexity, thickness and printed material in order not to damage it. A temperature regulator allows mixing the water with temperatures from +30° C to +55° C. It requires connection to the cold water and hot water network of the laboratory. The waste water with the detached material must flow into a decanter.

DATA SHEET

Voltage 230 V
Frequency 50 Hz
Power input 950 W
Water consumption 0,6 l / min
Operating temperature +20 ÷ +55 °C
Connections to the water mains (no. 2 connections) 3/4 Gas
Diameter of discharge tube connected to the decanter 32 mm
Variable operating pressure 0,5 ÷ 6 (5 ÷ 60) MPa (bar)
Sound pressure level [EN-3746-LpA] 76 dB (A)
Height 550 mm
Width (front) 520 mm
Length 660 mm
Weight 37 kg
Weight inclusive of packaging 55 kg
Packaging size 600 x 800 x 700 mm