EFFEGI BREGA SOFT RELAX

Using a hot water jet, the EFFEGI BREGA SOFT RELAX rotary drum washer allows water-soluble support materials to be removed from 3D-printed models (PolyJet technology) automatically and in a short time. The unit is equipped with a hot-water inlet and a cold-water inlet. A dedicated regulator allows the temperature to be set from 34°C to 55°C. It is also possible to set the pressure from 5 to 30 bars depending on your needs. Compact, fast and flexible is a device that will save you time and money in your laboratory.

Thanks to EFFEGI BREGA SOFT RELAX  it is possible to automatically remove water-soluble support materials from
3D-printed models (PolyJet technology). With an adjustable jet of cold water, our rotary drum washing
machine cleans the 3D-printed models and makes them ready-to-use.
The device allows cold or hot washing, depending on the set temperature: the temperature is automatically
adjusted from 20 to 55° C, according to needs. The use of hot water allows obtaining completely clean surfaces
with a reduction in washing times and the quantity of water used. The pressure is adjustable from 5 to 30 bars.

Main features

• Possibility of working using cold water
• Electronic board for the management of the functions and the signaling of anomalies
• Pressure regulator of the nozzle to use according to the model to be used
• Programmable timer for the right washing time
• Side discharge for the waste water containing debris

.An electronic board manages all functions and signals.
The LEDs show the following
conditions:
• Device ready
• Running cycle
• Hatch door not closed
• Pre-warning: service within
30 hours
• Alarm: call for service
• Number of operating hours
The LEDs show the following
conditions:
• Device ready
• Running cycle
• Hatch door not closed
• Pre-warning: service within
30 hours
• Alarm: call for service
• Number of operating hours

TEMPERATURE REGULATOR

The use of hot water allows a reduction in time and
therefore consumption

PRESSURE REGULATOR

The working pressure of
the nozzle can be
adjusted from 5 to 30 bars.

LOAD HATCH
The operator can load
3D-printed models of
different forms and
dimensions. Anti-shock
spheres of Ø 12-15-20-
25-30 mm are available

https://www.effegibrega.it/en/prodotti/post-process-solutions/automatic/soft_relax_htm.php