EFFEGIBREGA MICROJET HTM
£3,595.50
EFFEGIBREGA MICROJET HTM is a device specifically designed for the thorough washing of 3D-printed models with water soluble support material.
EFFEGIBREGA MICROJET HTM is the best solution for washing holes, cavities and “difficult” areas of the printed parts. By adjusting the shape of the water jet and the pressure, the operator manages the washing action depending on the complexity, thickness and material in order not to damage it. A temperature regulator allows mixing the water with temperatures from +30° C to +55° C. It requires connection to the cold water and hot water network of the laboratory. The waste water with the detached material must flow into a decanter.
Main features
- Professional and specific to meet the needs of those who print additives with water-soluble supports.
- Pressure regulator from 10 to 60 bar and jet adjustment on the handpiece.
- The work chamber is illuminated with low-consumption LED technology.
- A thin jet of air keeps the glass clean during processing.
- The gloves protect the operator while allowing good sensitivity.
Voltage 230 V
Frequency 50 Hz
Power input 950 W
Operating temperature +5 ÷ +40 °C
Water temperature regulation +20 ÷ +55 °C
Water consumption 0,6 l/min
Connection to the water mains (no. 2 connections) 3 / 4 Gas
Diameter of the discharge tube connected to the decanter 32 mm
Variable operating pressure 0,5 ÷ 6 (5 ÷ 60) MPa (bar)
Sound pressure level [EN-3746-LpA] 76 dB(A)
Height 380 mm
Width (front) 465 mm
Length 600 mm
Weight 34 kg
Weight inclusive of packaging 38 kg
Packaging size 590 x 460 x 600 mm
https://www.effegibrega.it/en/prodotti/post-process-solutions/manual/microjet_htm.php
Related products
Instructions of the CA® Stripping Tools
Fabrication of a bleaching tray
