SprintRay Crown Resin

£471.78

SprintRay Crown Resin by BEGO® is a ceramic filled hybrid material for 3D printing single crowns, inlays, onlay, and veneers. This material is easy to finish and polish using traditional methods, and features excellent aesthetics to blend with existing teeth.

High strength and resistance to wear make SprintRay Crown Resin by BEGO® a go-to material for restorative 3D printing. And because SprintRay Crown by BEGO® is FDA 510(k) cleared and fulfills all the requirements for a Class II medical device, you can place with confidence.

Crown is available in seven shades: A1, A2, A3, B1, B3, C2, and D3. Available for sale in the US, EU, UK, and EFTA.

  • Biocompatible, FDA 510(k) cleared and fulfills all the requirements for a Class II medical device
  • Versatile: use as a single crown on natural tooth or abutment, as an inlay, onlay or veneer
  • Very low water absorption reduces the tendency to age while a smooth surface means low plaque accumulation

 

VarseoSmile Crown plus is the world’s first hybrid material for 3D
printing of permanent single crowns, inlays, onlays and veneers.
Scientific studies by renowned universities and institutes prove
the excellent material properties.
The summary of the study results includes the
following aspects:
• Breaking Load and Abrasion Resistance
(10-year Chewing Simulation)
• Abrasion and Surface Roughness
(5-year Toothbrushing Simulation)
• Long-term Cementation Stability, Decementation Behavior
and Marginal Gap Formation (5-year Chewing Simulation)
• Solubility
• Cytotoxicity
Chemical Composition
Esterification products of 4.4’-isopropylidiphenol, ethoxylated
and 2-methylprop-2enoic acid. Silanized dental glass, methyl
benzoylfor- mate, diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide.
Total content of inorganic fillers (particle size 0.7 μm) is 30 – 50%
by mass.
Technical Data
Density ca. 1.4 – 1.5 g/cm3
Layer thickness 50 μm
Viscosity 2,500 – 6,000 mPa*s
Flexural strength 116 MPa
Flexural modulus 4.090 MPa
Water solubility 0.23 µg/mm3
Water sorption 3.6 µg/mm3

SR_SS_Crown Info

SprintRay-Crown-Scientific-Studies-EN

Crown Cementation Guide v2

SprintRay-CrownDesignGuidelines-V3

https://support.sprintray.com/hc/en-us/articles/12612437845143

You may also like…

Skip to content