Duran®

Intended purpose: Thermoplastic foils for the
manufacture of appliances and splints for dental
and orthodontic treatments.
Indication: Suitable only for the fabrication of
dental splints in different areas of application
such as aligner splints, retention splints, bite
splints and mandibular protrusion splints.
Indication table with further indications and
instructions for use at www.scheu-dental.com/
pressure-moulding-material.
Contraindication: Allergic reactions to compo- nents of DURAN®/DURAN®+ (PETG) cannot be
ruled out in sensitised people.
Any use not stated above is contraindicated.
Storage: Store at 5°C to 35°C. Protect from
sunlight. Keep dry.
Important: Must only be used by qualified per- sonnel. For single use. Not suitable for partial
build-up with light-curing resins. Any serious
incident involving the product must be reported to
the manufacturer and the competent authority
immediately.
Safety information: The practitioner is responsible for correct use. The splint must not be used if
the material is cracked/broken/contains bubbles;
there is a risk of swallowing or aspiration. When
using DURAN® with 3D-printed models, a
non-perforated protective foil (ISOFOLAN®) or
alternatively DURAN®+ must be used. Remove
the protective foil after the thermoforming pro- cess. Do not bring the products into contact with
alcohol-based/organic solvents, hot water or
steam jets.